Trying to make 200mg Tren

[BamBamJP]

Hey guys when i usually make tren i get anywhere from 75-100 mg per ml. I was thinking about making 200mg tren and was wondering if you math guys could give me some spec's on the amount of oil and BA i need for a 2g kit. Thanks for your help!

[Slappyoil]

Originally Posted by BamBamJP

Hey guys when i usually make tren i get anywhere from 75-100 mg per ml. I was thinking about making 200mg tren and was wondering if you math guys could give me some spec's on the amount of oil and BA i need for a 2g kit. Thanks for your help!

I do not know the pain factor involved with a 200mg/ml Tren nor do I know for sure what kind of dissolution rate you will actually get with lower BA /BB concentrations...but the oil should make up for it...and just because you get it into solution doesn't mean it won't crash once injected...just giving you the numbers here so be careful amigo...

Here are a couple you can try...if you use the one with lower BA / BB concentrations, you may wanna use some low heat to help dissolve it as well as crushing the pellets first...

200mg/ml Tren using 2g
5.5 ml oil
1 ml BA (10%)
2 ml BB (20%)

Here is one with a bit less BA / BB and a bit more oil

200mg/ml Tren using 2g
7 ml oil
0.5 ml BA (5%)
1 ml BB (10%)

...personally, I would use the first one and just buffer it a little with a little more oil (like another half ml oil)...won't kill your potency that much and will give you aliitle more room for error...post your results

[zippy0502]

The tren should dissolve in the BB/BA and oil at near 200mg/ml. I am not sure how painful that is though.

[Slappyoil]

Originally Posted by zippy0502

The tren should dissolve in the BB/BA and oil at near 200mg/ml. I am not sure how painful that is though.

...good to know...I made some really nice Tren ace powder (recrystalization) and maybe I'll mix it up at 200 and see how it feels...I think I will drop the BA to 3% and bump the BB to 12%, that usully works nice for me...

[zippy0502]

let us know if it works for you