Masteron(dros prop) heat and mix?

refpoc

i am going over my notes and i noticed i never heard too much about masteron (dros prop) is the mix roughly 5% ba ,20bb. The melting temp is so high-155c,do i have to heat the mix that high? I heard heating up to 275f is not good and 155c is in the 300f range.thanks for help,appreciated!!

**samax64**

masteron dosen't need to get that hot bro.... 2%ba and 20%bb will do... no need to get it that hot just watch it at about 150f-200f it will go clear keep it at that temp for a few minuets and keep stirring.. and it will be done and smooth

refpoc

Thanks< Good Information

danda

nice information

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

	#1 (permalink)
refpoc New Member Join Date: Feb 2008 Posts: 7 Rep Power: 0	Masteron(dros prop) heat and mix? i am going over my notes and i noticed i never heard too much about masteron (dros prop) is the mix roughly 5% ba ,20bb. The melting temp is so high-155c,do i have to heat the mix that high? I heard heating up to 275f is not good and 155c is in the 300f range.thanks for help,appreciated!!

	#2 (permalink)
samax64 Super Moderator Join Date: Jan 2004 Posts: 4,527 Rep Power: 9	Re: Masteron(dros prop) heat and mix? masteron dosen't need to get that hot bro.... 2%ba and 20%bb will do... no need to get it that hot just watch it at about 150f-200f it will go clear keep it at that temp for a few minuets and keep stirring.. and it will be done and smooth

	#3 (permalink)
refpoc New Member Join Date: Feb 2008 Posts: 7 Rep Power: 0	Re: Masteron(dros prop) heat and mix? Thanks< Good Information

	#4 (permalink)
danda New Member Join Date: Feb 2008 Posts: 26 Rep Power: 0	Re: Masteron(dros prop) heat and mix? nice information

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)