converting test prop

[joedokes]

I'm converting test prop from powder. Not from Syno. I'm doing 25grams of powder, and i have what looks like about 4-5grams at the bottom. Everything else seems to have swirled up and mixed pretty good.
I made 25grams of deca and cyp and that looks good.

[rAJJIN]

Joe,
the prop is a bit harder. It takes more ba-bb to get it to hold.
Did you TOTALLY dissolve it in the bb-ba mixture before you added the oil? Is it finished or are you still making it?
try heating it up in a pan of hot(not boiling) water.
that should dissolve it but if there is not enough solution it will crash out again Im afraid.

[rAJJIN]

Heres what I went buy and it worked great.
I used what Ry roid suggested.
http://www.professionalmuscle.com/fo...rop+conversion

[joedokes]

Thanks Rajjin, I used some some heat and it looked like almost all of it picked up. THere was still some crystals at the bottom, but a significant amount less then before. I used a kit that Kaotic had designed for me especially for that conversion. Everything appeared to be holding after4 hours and theres 2 cc's in my ass already and no pain.

[joedokes]

Can test prop crash after 8 hours?

[rAJJIN]

yes. it can crash after days even.
nothing against kc, but you needed more bb-ba imo
as a general rule yes 1ml per gram works BUT the prop
takes more to get it to hold.
honestly I dont know if its fixable or not.
Look for Superchicken on www.massmonsterz.com
you should be able to find in there guys that have had the same problem your having. goodluck

[joedokes]

I've added more solution with heat. It cleared right up, but once it was taken away from the heat it got cloudy again. Is it shot?

[rAJJIN]

Man I dont know, its not sounding good.
If youll try my way ( or should I say Ry`s) you will not need a kit only the ba and bb
Sometimes the kits can be more then the hormone.
Get your oil from the grocery store, so when you order your
ba and bb also get a few whatmans and whatever vials you may need. May still be fixable but sounds like its falling out for some reason. email or pm me were your powder came from, maybe I can send you to a better source.

did you totally dissolve the powder in the solution
before you added the oil? I no mine took a LONG time to COMPLETLEY dissolve and even had to heat it a bit.
then added the oil and its held just fine for months now

[rAJJIN]

Joe,
How many mg-per ml did you make it at?
Im thinking you maybe tried to make it to strong???
Id say for prop stay around the 100mg range.