Clenbuterol Tabs/Caps

[vigilant3]

I'm looking to make my own Clen capsules or tabs and have no idea where to start. Getting my hands on the powder won't be the hard part, but knowing what to do with it afterwards will be. Anyone got any experience with this?

	Clen

[samax64]

Bro if you have not done any mixes clen is not a good one to start with at all the chance of hurting your self in high... look in the conversion thread for master c cook book he tells you how to make it in to oral ..

	Clen

[BHarper]

I didn't know if I should post this, but I figured that I would go ahead.

It is Very simple to do.

Get a cap-m-quick or a similar setup(Herbal Capsule Filler 100).
put all your caps in the machine and fill them with your filler. Dump the powder out of the machine into a bowl and get the weight of the filler. This is how much you will need for every set of caps you make.
***note - Not all fillers are created equal. Some are more dense than others so make sure you use the same each time.

Now to measure the clen or T3.
Note:quantities can be changed and made smaller for less accurate production.
-Get a 2L bottle, measure out 1.8L of water and .2L vodka (the vodka is a preservative so the water doesn't get stagnant.
-Find the most accurate scale you can get (accurate to at least .1g, .01 or more is better)
-Measure out 10g of clen (the larger amount of API that is used, the less margin of error is possible from a bad scale).
-Place the 10g of clen into the 2L bottle.
You now have 5mg/ml clen. WAY TO STRONG!!!


-Get a 1L bottle and measure out 40ml from your first bottle (that will equal VERY close to 100ml) and put it into the 1L bottle.
-Now put 960ml of grain alcohol or vodka in the rest of the bottle (alcohol is used to speed evaporation later)
-Mix bottle around
You are not the proud owner of 1000, 200mcg doses of Clen or T3!!! Use carefully

Ok, your probably wondering how do you cap a liquid.??

This is a good time to add color if you wish. Food coloring works well.
-How many mcg's do you want the cap's to be? You say 100mcg?? OK!
-Take the bowl that you dumped the powder in (let's say that it is for 100 caps) and add 50ml of the liquid to them.
-Now mix or shake the hell out of the paste. Make sure you mix it as good as you can. Now spread it out on wax paper or foil to dry.
-Now that it is dry, put the hardened powder into a mortar and pestle and grind it into a fine powder.
-now place the powder back into the caps!

You can do this with larger quantities as well. When the mixture gets wet the API (Active Pharmaceutical Ingredient), Clen or T3, mixes thoroughly throughout the powder giving a pretty homogeneous mixture. When the powder is later crushed and ground, it is even further mixed into a totally homogeneous mixture.

You could do bulk quantities by following this equation:
X * (weight of the filler in all caps) + X * (50ml API mixture) = X batches ready to cap!
Just weigh the amount for each batch of caps and you are good to go.

This method will work for any type of small miligram API such as Arimidex, aromasin, etc.. The displacement and weight of the API is really degligible with Clen and T3 but would need to be taken into slight consideration when working with Arimidex or Aromasin.

	Clen

	T3